Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
LCD Screen and Digitizer Full Assembly for Xiaomi Pocophone F1, For Xiaomi Pocophone F1 (TFT)Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass
Before Installation NotesTips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
About the product
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Xiaomi Pocophone F1
2. Replace your broken or unusable item with a new one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Specification:
| General |
|
| Package Weight |
|
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 965 reviews
Sort
Product Reviews
★★★★★ 5
1999 BMW 528i Fit and works like Original BMW-Pleasantly Surprised
1999 BMW 528i M52TU Engine. Pleasantly surprised and impressed. Everything fit as it should. Yes, one connector pipe took a bit more pressure to get it to "click" and lock, but it did click and lock..and better tight to insure no vacuum leak. Definitely works well and stopped the vacuum leak that old system had. Would recommend especially since price point might lead one to think that quality is not that good, but I'm glad I didn't spend any more on something else. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 3, 2025
★★★★★ 5
Test fit to make sure it connects
When I revived it I thought it had looked a little too small until I compared it, I test fitted it and at first I thought it was a tad bit bigger but realized the more I pushed it in the more it went very tight fit and my car is running healthy. Installation is a pain but go to YouTube and search the “” the 50’s kid”” Who has two methods to getting them on, I went the intake removal route to replace additional parts.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2020
★★★★★ 5
Cheap Replacement
These are an easy replacement for anyone who owns a BMW m52/m54 engine that has PCV issues. My car was burning about 1 quart every 1,000 miles. The parts are direct fit and install fairly easy. If there is resistance, lube the hole or o-ring up with some grease and it will slide in easier. Took me about 2 hours start to finish. My mechanic recommended that I remove the intake manifold to do the job. I don’t see how you could do it without removing the intake manifold.
These parts probably won’t last as long as true BMW parts but on a 20 year old car I don’t see the benefit in using genuine BMW parts. Cheap stuff will suffice; worst case it doesn’t last quite as long.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2021
★★★★★ 4
NOT TOO HARD TO INSTALL...
This CCV kit seems adequate.
People say that because the hoses supplied with these kits are more brittle than the genuine BMW parts, these are tough to install... But they're really not.
The ends on these hoses SWIVEL and you can sort of eyeball which way you need the fitting to be pointing BEFORE you put them on your manifold... They swivel, but they're tight and it takes a little force to turn them.
ALSO, a little dab of silicone gel or a spray of silicone out of the can, into the fittings on these makes a world of difference when clicking them on...
For the price, I highly recommend the kit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 14, 2025
★★★★★ 5
Great value
I recently had to replace the starter on my 2001 325i E46 with about 150k miles. While I had the intake off, I figured it would be a good time to replace the CCV because I was unsure if it had ever been done. My old CCV literally fell apart as I removed it, so I'm glad I replaced it.
The new parts were a little tough to put together, but overall came together well enough. A lot can be forgiven for the price. I would recommend assembling the system before installing in your vehicle to get a good sense of how it all goes together and to hopefully loosen up the fittings just a tad before installation. 50skid on youtube has a great DIY for doing this job.
I only finished this job yesterday, but my car has been running great. I can't yet confirm, but this may have solved my running lean problem.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 27, 2023
recommand products
Dingo Smycz pojedyncza America Nevada 2,0x110cm
22.63
Cane Creek AER Headset Upper - IS41/28.6/H9, Aluminum Bearing
64.99
DT Swiss PR 1400 DICUT OXiC Rear Wheel - 700, QR x 130mm, Rim Brake, HG 11, Black, 32mm
452.98
FOX 34 Air Shaft Assembly - 2019, 160mm, FLOAT
44.84
CHABA Smycz taśma regulowana 20 czerwona w czarne łapki
39.98