Used Omnimark Mark 3 Moisture Analyzer (No-Warranty), 100 g x 0.001%

Used Omnimark Mark 3 Moisture Analyzer (No-Warranty), 100 g x 0.001%Similar to a convection oven, vacuum oven or Karl Fischer titration, this Used Omnimark Mark 3 Moisture Analyzer is ideal for verifying accuracy and precision. Accuracy is stated by the average of repeat tests compared to the standard AOAC or ASTM reference value. Precision is established by the standard deviation of repeat tests on the Mark 3. It features thermally isolated balance with superior low level moisture performance of less than 50 ppm. Up

Similar to a convection oven, vacuum oven or Karl Fischer titration, this Used Omnimark Mark 3 Moisture Analyzer is ideal for verifying accuracy and precision. Accuracy is stated by the average of repeat tests compared to the standard AOAC or ASTM reference value. Precision is established by the standard deviation of repeat tests on the Mark 3. It features thermally isolated balance with superior low-level moisture performance of less than 50 ppm. Up to four heater modules can be run with one control module. The Mark 3 comes with serial, USB and Ethernet for bi-directional connectivity to PCs and printers. The built-in temperature and weight calibration feature ensures accuracy.

Features:

• 100g Maximum Weight Capacity
• Display of Results: 0.001%
• Balance Resolution: 0.0001g
• +/-0.0001g Repeatability
• Recommended Working Range: 0.005 to 99.995%
• Method of Measurement: Loss on drying via four infrared quartz cylinders
• Modular Configuration: Control and Heater Modules (Optional: up to 4 heater modules)
• Temperature Setting/Control: 30-210ºC in 1º increments via RTD sensor, +/- 1ºC
• Modes of Operation: Standard test, Syringe, “Splash” Method or Concentration Modes
• Endpoint Determination: Actual Slope, Calculation and Time Modes
• Security Mode: Selectable setup and operation protection with numeric code
• Graph Mode: Graph of temperature and percentage over time
• Display: Quarter VGA with contrast adjustment (black on white or white on black)
• Keypad: Sealed membrane with audible tactile feedback
• Internal Printer: Built-in thermal, 40 character graphic with selectable format