Direct Mount Chainring for Sram (42T)

Direct Mount Chainring for Sram (42T)Direct mount rings designed for SRAM cranks with removable spiders. This chainring is equipped with the patent pending Drop Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. FEATURES: Drop Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10 , 11 , and 12 speed chains, with the exception of Shimano 12 speed chains Shimano 12 speed chains require the use of

Direct mount rings designed for SRAM cranks with removable spiders. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.

FEATURES:

• Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
• Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
• Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
• If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
• Not compatible with the SRAM RED and Force AXS 8-bolt interface
• Made from 7075-T6 aluminum for long life
• Use of a clutch-style rear derailleur is recommended
• Compatible with 12-speed SRAM Flattop chain
• Not compatible with 12-speed Shimano Hyperglide + chains

SPECS:

• Round or Oval: Round
• Material: Aluminum
• Chainline/Hub Compatibility: 135/142 MTB Hubs , 170/177 Hubs
• Direct Mount Type: Direct Mount SRAM
• Tooth Count: 42
• Ring Position/Type: Chain Retaining Single Ring
• Drivetrain Speeds: 9 , 10 , 11 , 12
• Offset: 6