SKU: 67549221357

High Lifter Portal Gear Lift 4" Ranger 1000 (Standard Cab & Crew Models) - 15% Dual Idler

$1662.75 $1847.50
Save 10%
No.2 Bestseller on ateurope.org >

Pay in installments of $461.88 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 31 - Aug 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

High Lifter Portal Gear Lift 4" Ranger 1000 (Standard Cab & Crew Models) - 15% Dual IdlerFree shipping in the lower 48 states. SKU: PGL 415DI RNG1 Installation Instructions This High Lifter 4' Portal Gear Lift is made tough and ready for any challenge. Now engineered with a gearing setup that allows two idler gears in the portal box to spread the load between twice as many teeth on the gears. This doubles the area and reduces the stress by half, allowing more abuse. This kit is for riders who are looking for torque and power. Description:

Free shipping in the lower 48 states.

SKU: PGL-415DI-RNG1

Installation Instructions

This High Lifter 4' Portal Gear Lift is made tough and ready for any challenge. Now engineered with a gearing setup that allows two idler gears in the portal box to spread the load between twice as many teeth on the gears. This doubles the area and reduces the stress by half, allowing more abuse. This kit is for riders who are looking for torque and power.

Description:

High Lifter Portal Gear Lift (Each kit includes 4 portal boxes)

15% & 30% Dual Idler Reductions

What does the Dual Idler Gear Lift offer?

  • High Lifter improved the portal design by adding a second idler gear in the gear box
  • The dual idler gears spread the load over twice as many teeth on the gear sets, which doubles the area and reduces stress by half.
  • You gain more reliable torque transfer
  • Stop burning up belts and breaking so many axles; differentials; drive shafts; snorkel gears…
  • Gear reduction extends brake life by needing brakes less often due to greatly improved engine braking
  • Even though a lower gear ratio will get your speedometer closer to a stock reading, that is still too high a gear to offset the loss of torque caused by the larger tires. If you don’t have a need to run fast, a lower ratio performs better and give you the power you want!

Why is this 4” kit better than our competitor?

Forged Gear Boxes

  • Strongest boxes on the market because forging produces a tougher piece of metal
  • Forging is stronger than both cast and billet aluminum
  • Competitors use cast aluminum and billet aluminum boxes
  • These portal boxes are extremely robust and give you more worry-free miles than any other portal

Gear Box Venting

  • Customers asked for box venting and we give you the option
  • Our box design offers a plug for venting with an optional easy to install kit that will be available soon
  • Vent kits allow an advantage of cooling which reduces early deterioration of the gaskets and seals

Gasket Material and Design

  • High density Kevlar fiber gaskets plus no additional sealant is needed
  • Gasket material is creep resistant plus oil and coolant resistant

Seals

  • Two oil seals on the spindle shaft for 100% more sealing area
  • Dual seals prevent water intrusion and oil leaks
  • True triple seal on the input shaft which includes a wiper seal that provides a significant extra layer of protection

Backing Plate

  • These are the strongest backing plates on the market
  • 5/16” steel plate with Bent flanges for strength and durability
  • Welded gusset brackets and designed to factory off-set
  • Works with all control arms that are built to factory hub specifications

Rotors

  • Precision ground stainless steel rotors (this is a big deal for brake performance)
  • Access holes for ease of assembly and disassembly
  • Slotted rotor allows for heat dissipation and cooling

Gear Profile

  • Alloy steel heat treating process increases overall internal and external strength
  • CNC precision ground machining ensures excellent fitment and increased strength
  • Controlled gear lapping for ease of installation and a quieter performance

Tire Fitment:
Largest Tire with Portal: 33"
Largest Tire with Forward Arms: 35"
Our stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

Wheel Requirements:
14" or larger
14" factory wheels must run 1" spacer
14" & 15" can not exceed 4-1/2" backspacing
16" & larger can not exceed 5" backspacing

Fits:

2018 Polaris Ranger 1000 XP
2018 Polaris Ranger 1000 XP Northstar
2019 Polaris Ranger 1000 XP Crew Northstar
2019 Polaris Ranger 1000 XP Crew
2019 Polaris Ranger 1000 XP
2019 Polaris Ranger 1000 XP Premium
2019 Polaris Ranger 1000 XP 20th Anniv Edition
2019 Polaris Ranger 1000 XP Crew Premium
2019 Polaris Ranger 1000 XP Crew 20th Anniv Edition
2019 Polaris Ranger 1000 XP Northstar
2019 Polaris Ranger 1000 XP High Lifter Edition
2019 Polaris Ranger 1000 XP Crew High Lifter Edition
2019 Polaris Ranger 1000 XP Back Country
2019 Polaris Ranger 1000 XP Crew Back Country
2020 Polaris Ranger 1000 XP Premium
2020 Polaris Ranger 1000 XP NorthStar
2020 Polaris Ranger 1000 XP Texas Edition
2020 Polaris Ranger 1000 XP High Lifter Edition
2020 Polaris Ranger 1000
2020 Polaris Ranger 1000 EPS
2020 Polaris Ranger 1000 Premium
2020 Polaris Ranger 1000 XP Crew Premium
2020 Polaris Ranger 1000 XP Crew NorthStar
2020 Polaris Ranger 1000 XP Crew Texas Edition
2020 Polaris Ranger 1000 XP Crew High Lifter Edition
2020 Polaris Ranger 1000 Crew
2020 Polaris Ranger 1000 Crew EPS
2020 Polaris Ranger 1000 Crew Premium

Click here for High Lifter's limited lifetime warranty.

SS | 11-29-21

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 67549221357

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 20 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
J. S. Kline
Draper, US
★★★★★ 5
Excellent Cabinet for someone good at mounting a cabinet
Color: White, Style: Wall Cabinet
The cabinet arrived very well packaged with an instruction booklet, hardware, and an Allen wrench. The booklet says you will just need a Phillips screwdriver, but you will also need a drill with an appropriate bit (more on the bit later) to mount the cabinet on the wall. Assembling the cabinet was simplified by how well the cabinet pieces and hardware were labeled and referenced in the instruction booklet. The holes in all the cabinet parts lined up nicely. The doors swing on spring loaded pivots. They are not adjustable, but work well and are probably much less expensive than European style hinges. I was concerned that the doors would not line up, but they look fine. The Magnetic Latch also works well, but the little piece of wood that it mounts on fell off during assembly so I glued it back in place. This was the only problem I had assembling the cabinet. I let the glue dry overnight and mounted the cabinet the next day. The wood support plate they ship with the cabinet is a great way to hang a cabinet, however I did have some problems using the supplied anchors. I recommend having some other anchors and screws available in case you have similar issues. Skip this paragraph if you do not care about the details: I mounted the cabinet on drywall. The instructions said to drill 11/32” holes for the supplied plastic wall anchors. I did not have an 11/32” bit so I used a 5/16” bit. Even though my holes were 1/32” smaller than specified, the anchors slid into the drywall very easily without having to tap them. I recommend using a 5/16” bit or even a 9/32” bit instead of the 11/32” they specify. Next I mounted the support plate with the supplied screws, but I could not get the screws tight enough to hold the plate securely in place. It felt like the screws were too small in diameter so I used some slightly larger screws. That worked fine for one of the screws holding the plate and the two lower screws, but the second screw through the plate would not bite and hold the plate firmly. Fortunately I had one HILTI 3/16” hollow wall metal anchor left over from a previous project and was able to get the plate very solidly attached to the wall. My wife is very pleased with the cabinet. I did have some trouble with the latch and the install so I was tempted to knock off a star, but I think this is a 5-Star item considering the low cost and how well the the cabinet parts aligned with each other.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2025
M
Verified Purchase
Monica G.
Alexandria, US
★★★★★ 5
Love and amazing for the price!
Color: White, Style: Wall Cabinet, Color: White, Style: Wall Cabinet
Perfect! I'm a renter and didn't want to spend an arm and a leg on something that might not work in the next place so this looked like it would be a good fit. I really wasn't expecting much for the price point but I was VERY pleasantly surprised. It's a great piece. I love assembling things (I'm an Ikea pro) but this had literally the easiest and most explicit instructions I have ever seen. Every piece is clearly labeled. The hardware comes in a bubble pack, again clearly labeled. Rhe instructions are very clear. Another thing I appreciated was the mounting mechanism which is a French cleat. It is much easier to level and screw in a cleat than to recruit help and try to hold a cabinet in place and try screwing it in. I'm a fat middle age woman and I had no problem mounting it by myself. Notice there are no screws visible on the outside. That was a huge selling point for me. Only con is that for the quality of everything else, the shelves are on the thin side, placing anything substantial would definitely make them bow. Background is a scrap of peel-and-stick.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 28, 2026
K
Verified Purchase
Ken
Massapequa, US
★★★★★ 5
Good cabinet choice
Color: White, Style: Wall Cabinet
I needed a wall cabinet for a recessed area above the toilet. This one fits the area perfectly and provides a good amount of storage in an otherwise wasted space. It looks good as it coordinates well with my white shaker style cabinets elsewhere in the room. It was easy to assemble, doors lined up perfectly, and mounting was a breeze with the included screws and hardware. It doesn't get hard use in this location, but seems sturdy after almost a year.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 7, 2025
A
Amazon Customer
Pawtucket, US
★★★★★ 5
Versatile Room Divider With Easy Assembly and Strong Coverage
Size: 3 Panel 12FT W
I picked up this Siebwin 3-panel folding room divider mainly for privacy and room separation, and overall it works very well. Assembly is very straightforward, and the divider can be set up, taken apart, and stored without much effort. The fabric quality feels good, and the frame construction is stronger and more stable than expected. The support tubes especially feel well built and help keep the divider standing securely. One feature I really liked is the flexibility of the design. The panels can be used together as a complete divider or separated depending on the setup and available space. That makes it much more versatile for different room layouts or temporary privacy needs. The coverage is also very good, and the size matches the manufacturer’s description accurately. The fabric blocks light and background visibility well enough to provide solid privacy without feeling overly heavy. The wider feet also help improve stability compared to thinner folding dividers. Another positive detail is that everything arrived complete with no missing parts or damaged pieces, which made assembly much easier and faster. Compared to cheaper privacy screens, this one feels more durable and easier to customize depending on the situation. In terms of value for the money, it feels like a very practical and worthwhile purchase considering the size, flexibility, and build quality. Overall, a versatile and well-built room divider with easy assembly, strong privacy coverage, stable construction, complete included parts, flexible panel configuration, and excellent everyday functionality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
F
Fred
Cuba, US
★★★★★ 5
Stable, flexible in deployment configuration, creates true privacy and looks great.
Size: 3 Panel 12FT W
This is the second room divider panel I have installed, and there are several features about this one that I like much better than my older one. The fact that there are no gaps and that the material is thicker means you get more privacy or more hiding power, if you wish. My older divider has vertical spaces between each of the panels and the panels are half as wide as the Siebwin panels, so there are many vertical spaces. The Siebwin divider really creates privacy. Another feature that I really appreciate is that the legs are wider and stand off from the floor. On my older one the legs are flat and they're rather awkward to adjust because they create more drag on the floor. The feet on the older one also loosen if you turn them counter clockwise, so adjustments of configuration that require the feet to be moved are more complex. The older divider also must be deployed in a zig-zag fashion because he feet are not as wide, but this new one can be deployed and stable in a straight, an "N" shape or an arc. They are both the same length, but because the older one must be use in a zig-zag deployment it doesn't reach to the length of the new one. The Siebwin divider definitely costs more at $103.48, but it sports several features and advantages over the other brand, so it does a better job and is worth the extra cost.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026

recommand products

New York State State Map - Cut Out Style - Fit Together Series
49.95
Alberta Province Map
99.95
Afghanistan & Pakistan Map with Provincial Boundaries plus Terrain
199.95
55 x 35 Inch World Digital Map with US States and Canadian Provinces - plus Land & Ocean Floor Terrain - Mercator Projection
249.97
Africa Map Plus Terrain with Countries, Capitals, Cities, Roads, and Water Features
99.95