SKU: 70357497466

ImmersionRC Ghost Atto Duo – The Ultimate Racer’s Receiver

$45.89 $50.99
Save 10%
No.2 Bestseller on ateurope.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

ImmersionRC Ghost Atto Duo – The Ultimate Racer’s ReceiverWhy Race with Anything Else? For racers on the bleeding edge, every little helps. Miss a single control packet at 160km h (even at 222Hz) and a racing drone moves > 40cm (> 15 inches) without control. The Atto Duo is a high end receiver for drone racing which combines two independent receiver channels, and twin antennas, to dramatically reduce lost packets during racing. Check out all our Receivers and the rest of our ImmersionRC Ghost Products!

Why Race with Anything Else?

For racers on the bleeding edge, every little helps. Miss a single control packet at 160km/h (even at 222Hz) and a racing drone moves > 40cm (> 15 inches) without control.

The Atto Duo is a high-end receiver for drone racing which combines two independent receiver channels, and twin antennas, to dramatically reduce lost packets during racing.

Check out all our Receivers and the rest of our ImmersionRC Ghost Products!

Nothing comes even close.

  •  2.4GHz ISM Band
  •  Tiny 15 x 12mm, and 0.61g
  •  Two fully independent Ghost receivers
  •  Crazy Race Performance, 222.22Hz updates (500Hz Ready)
  •  ~4ms End to End Latency (2ms ready), with OpenTx Integration
  •  Fully supported by Betaflight with GHST driver

Package Includes:

  • 1x Atto Duo Receiver
  • 2x qTee Antenna
  • Silicone Cables
  • Heat Shrink

A Growing Family

The Atto was the first member of the Ghost Receiver family. Small enough for most applications, and best-in-class performance.

The tiny Zepto, 10mm x 10mm, and weighing in at 0.31g, is ideal for micro-class quads, including Cine-Whoops where every gram matters. Same mounting hole pattern for installation on any of the Proton Pack boards.

The new Atto Duo is the same size and weight as the Atto.

Proton Pack Compatible

By far the cleanest way to mount the essential Video Transmitter, and Ghost Receiver, on a 30×30, 20×20, or Whoop/Toothpick frame.

Single-sided PCB, with low-profile mounting of transmitter and receiver, which doubles as heat-sink for the video transmitter.





Why Full Diversity?

When racing, the control link, connecting the pilot’s brain to the drone, is absolutely critical.

Standard receivers, using single antennas, or dual-antenna setups using ‘Antenna Diversity’ drop performance when antennas are blocked by frames or batteries, or when the nulls in the antenna radiation pattern cause signal loss.

True diversity receivers use two completely independent receiver chains to greatly improve performance. Every control packet gets two chances to be received correctly.

Long Range FPV, and UAV Benefits

For long range FPV, and UAV use, where slow movement of an aircraft can result in significant time spent in antenna nulls, the Atto Duo is exactly what is required.

Link Margins are significantly improved with a full diversity link, and with improved link margin comes extended range, or increased security at shorter range.

SPECIFICATIONS & SUPPORT FILES

Essential Specs, User Manuals, Firmware & Downloads:

ÁTTO DUO Rx SPECIFICATIONS

  • Receivers: Twin, Independent, Full Diversity
  • Frame Rate: 250Hz Standard, 500Hz Ready
  • Downlink RF Power: +13dBm
  • Sensitivity: -117dBm in Long Range mode
  • Serial Formats: SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted  1 2 3
  • Firmware: Over-the-air (OTA) upgradable
  • Power Supply: 5V recommended, as low as 3.6V tolerated, no more than 5.5V
  • vTx Control: Tramp control from ‘T’ pin on Rx, regardless of selected serial format
  • Antenna Connectors: Standard U.FL (vs. Zepto which uses the much smaller MHF4)
  • Dimensions: 14.8mm x 11.5mm, 0.6g (w/o antenna)
  • Rx Noise Floor Analysis: Auto on power-up, or on demand from the Tx
1 GHST protocol available both OpenTx 2.3.10 (without control sync), and in a custom IRC build with sync.
2 GHST protocol supported in Betaflight 4.3 development builds.
3 Sbus is inverted by definition, SBus Inverted flips it over so that it doesn’t require inverters on F4 FCs
4 Some specifications vary depending upon the regionally-specific product SKU
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 70357497466

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 481 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Marcos Castillo
Grantham, US
★★★★★ 5
Comparable to Higher-End Chairs, Solid Build and Support Without the Premium Price
Color: Black Full Mesh, Style: Executive, Color: Black Full Mesh, Style: Executive
I’ve been using this chair for a bit now and it’s been a genuinely upgrade. The build quality stands out right away, it has real heft and doesn’t feel cheap or hollow. Everything fits together cleanly and once assembled it feels stable and planted. I’m over 6 ft and 200+ lbs and it handles that without any issue, no creaking or sense that it’s being pushed to its limits. There’s enough space in the seat and back that you don’t feel boxed in. I added an extra ergonomic cushion and it still feels roomy, which isn’t always the case with chairs in this category. The adjustability helps a lot here, especially the lumbar support. Being able to move it up and down and also forward and back makes it easy to actually get it where you need it, instead of just accepting a fixed position. The armrests are also easy to dial in, especially if you’re switching between typing, reading, or leaning back a bit. The tilt range is useful, and the tilt tension is stronger than I expected. Even at my size it takes a bit of effort to lean back, which I see as a positive since it feels controlled and supportive rather than loose or overly easy to recline. The mesh is another strong point. It came in perfect condition, no snags, no loose threads, no rough edges anywhere. There weren’t any bits of untrimmed plastic on the frame either, which says a lot about the quality control. The mesh itself is taut with a bit of bounce, so it doesn’t sag but still has some give, which makes long sitting sessions more comfortable. Assembly was straightforward and clearly thought through. The instructions are easy to follow, but what stood out were the built in redundancies that keep you from second guessing anything. There are multiple left and right indicators when installing the arms, a clear front facing marker for the gas lift, and the screws are labeled in the packaging so you’re not guessing which goes where. It’s one of the smoother assembly experiences I’ve had. I also reached out to activate my warranty and had a very positive experience. I spoke with Alice who was very knowledgeable, quick, warm, and they went out of their way to help me with whatever I needed. When I inquired about the extra screw holes under the chair, she let me know that this was for a foot rest which was still in the production phase and unprompted offered to have one shipped to me when they were ready! There is an excellent team behind the product. Overall: well built chair with good materials, thoughtful design choices, and good adjustability to make it work for different setups. It feels durable, comfortable over longer periods, and especially well suited if you need something that can handle a larger frame without sacrificing support.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026
M
Verified Purchase
M. T.
Bozeman, US
★★★★★ 5
Excellent chair/great support.
Color: Black Full Mesh, Style: Executive
Excellent, comfortable chair! I was surprised at how easy it was to assemble---but the directions were super clear and all the pieces and parts were labeled. Once I received the chair, I was also surprised with the email follow up from Alice at Molents. All this for a reasonably priced chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 1, 2026
S
Verified Purchase
SL
Grantham, US
★★★★★ 4
Great Ergonomic Support and Fit, with Minor Adjustment Caveats
Color: Black Full Mesh, Style: Executive, Color: Black Full Mesh, Style: Executive
As someone who is 5'4" and 140 lbs, the size of the chair feels ideal, and the seat cushion is spacious without feeling overwhelmingly large. The breathable mesh material is high quality, keeping me cool during long working sessions while still feeling sturdy. The back support and adjustable lumbar feature aligns perfectly with my spine and has noticeably reduced my posture fatigue. The height adjustment mechanism operates smoothly to align perfectly with my desk, and the assembly process was surprisingly straightforward, taking less than 20 minutes with clear instructions and tools included. My only slight hesitations are regarding armrests not being long enough. The wheels are not easy to roll on carpet and require a bit of extra effort to move. Maybe a chair mat might be helpful on carpeted floors. However, for the price, the comfort and build are impressive.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2026
J
Verified Purchase
JFH
Fort Morgan, US
★★★★★ 5
High quality and incredible customer service
Color: Black Full Mesh, Style: Executive
This is an extremely well made chair at a very competitive price. The packaging, assembly instructions, as well as the way the hardware was packaged and labeled is probably the best I've seen. I'm particular about tools, and the included allen wrench was better than the normal "included tools" so much so that i actually used it rather than one of my own. The assembly was easy, and the chair itself looks and feels very high quality, and is very comfortable. Perhaps best of all was the level of customer service. I emailed on a weekend to activate the warranty and request the free cushion they offer. I got a personal response in less than a day and they offered upgraded wheels for free as well. This is a company worth doing business with.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
M
Verified Purchase
Michael Verbeke
Draper, US
★★★★★ 5
Great product AND customer service!
Color: Black Full Mesh, Style: Executive
I'm having a hard time writing this review because I can't tell which one I like better: the product or the customer service! I work on a computer all day, so a comfortable office chair is critical for me. This chair is great - it's adjustable in every way I need it to be, especially the armrests. The breathable mesh is both durable and supportive, and is more comfortable to sit in than the "overstuffed" chair it replaced. Let me just say: no company provides better customer service than MOLENTS. Right after assembling my chair (which was very easy, btw), I registered for the 2 year warranty they offer. The NEXT DAY I received an email from Alice in their customer service department 1) to confirm my warranty, 2) to tell me about the free foam seat cover they were sending me, and 3) to make sure the chair was comfortable and easy to assemble. Very few companies take the effort to follow up with customers right after making a purchase like that. I'm extremely happy with this purchase. This chair is worth MORE than it's weight in gold, and I strongly recommend to anyone thinking about buying an office chair to buy it from MOLENTS - you won't regret it. Oh, and if Alice's supervisors are reading this: she absolutely deserves a promotion!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 13, 2026

recommand products

Overcome [Ravnica: Clue Edition]
10.00
Seraph of the Scales [Ravnica: Clue Edition]
25.00
Foreboding Steamboat [Murders at Karlov Manor Commander]
18.00
Bloodthirsty Blade [Murders at Karlov Manor Commander]
10.00
LAB GROWN ROUND BRILLIANT CUT DIAMOND SOLITAIRE ENGAGEMENT RING
4400.00