Pay in installments of $12.47 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 4 - Aug 9
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Vitakruid Clear whey isolate tropical 750.00 GramVitakruid Clear whey isolate tropical Vitakruid Clear Whey Isolate Tropical Wat is eiwit? Eiwitten dienen als de bouwstenen van ons lichaam. Ze zijn opgebouwd uit aminozuren, die samen een eiwit vormen. Sommige van deze aminozuren kan ons lichaam zelf maken. Er zijn echter negen aminozuren die we via onze voeding binnen moeten krijgen, dit zijn de essentile aminozuren. Eiwitrijke voeding De meeste mensen zullen bij eiwit denken aan vlees, ei of kwark,
Vitakruid Clear whey isolate tropicalVitakruid Clear Whey Isolate - Tropical
Wat is eiwit?
Eiwitten dienen als de bouwstenen van ons lichaam. Ze zijn opgebouwd uit aminozuren, die samen een eiwit vormen. Sommige van deze aminozuren kan ons lichaam zelf maken. Er zijn echter negen aminozuren die we via onze voeding binnen moeten krijgen, dit zijn de essentiële aminozuren.
Eiwitrijke voeding
De meeste mensen zullen bij eiwit denken aan vlees, ei of kwark, maar eiwit vinden we in veel meer voeding terug. Ook vis, noten, granen en peulvruchten zijn rijk aan eiwit, en kunnen dus een belangrijke eiwitbron zijn in je dieet.
Voedingsmiddel Per 100 gram
Tonijn 29 gram
Runderbiefstuk 23 gram
Kipfilet 23 gram
Noten 20 gram
Haver 13 gram
Eieren 12 gram
Tofu 12 gram
Kwark 8 gram
Linzen (gekookt) 9 gram
Hoogwaardige eiwitten: gehydrolyseerd whey isolaat
We onderscheiden verschillende soorten proteïne poeders. Naast de veganistische varianten die meestal een basis hebben van erwt, rijst of bonen proteïnen, kennen we de wei eiwitpoeders. Wei is een bijproduct van kaas met een van nature hoog eiwitgehalte en beter bekend van de Engelse benaming: whey.
Er zijn verschillende soorten whey, zoals concentraat, isolaat en gehydrolyseerd isolaat. Voor de productie van Clear Whey worden lactose, vetten en koolhydraten uit het whey concentraat gefilterd. Hierdoor krijgen we een whey isolaat met een hoog eiwitgehalte.
Verhoogde opname door hydrolysatie
Vervolgens wordt de whey isolaat gehydrolyseerd. Binnen dit proces worden de eiwitten opgebroken in kleinere stukken en voorverteerd door de toevoeging van enzymen. Het eindresultaat is een gehydrolyseerd whey isolaat met een verbeterde opneembaarheid.
Betere oplosbaarheid
Dankzij het hydrolyseren van de eiwitten verbetert ook de oplosbaarheid van Clear Whey aanzienlijk. Je shakebeker een paar keer schudden en je hebt een heerlijk heldere eiwitlimonade!
Lichter verteerbaar dan reguliere shake
Lactose is een suiker die van nature in melk en zuivelproducten voorkomt. Whey concentraat bevat lactose, maar bij het maken van whey isolaat wordt dit specifieke suiker er voor een groot deel uitgefilterd. Clear Whey Isolate bevat hierdoor minder dan 0,2% lactose, waardoor de heldere eiwitlimonade lichter verteerbaar is dan de reguliere proteïne shake.
Compleet aminozuurprofiel
Alle eiwitbronnen bevatten alle verschillende aminozuren, maar de verhouding daarvan kan behoorlijk verschillen. Eiwitten met een compleet aminozuurprofiel bevatten aminozuren in verhoudingen die goed aansluiten bij onze behoefte. Sommige eiwitten bevatten in verhouding minder van bepaalde essentiële aminozuren, waardoor hun aminozuurprofiel minder compleet is.
Het eiwit in Clear Whey Isolate heeft een compleet aminozuurprofiel. Het bevat alle essentiële aminozuren, in de optimale verhoudingen.
Essentiële aminozuren en branched chain amino acids (BCAA)
Van de 20 aminozuren die ons lichaam nodig heeft, kunnen we een deel zelf aanmaken of omzetten uit andere aminozuren. Er zijn echter negen aminozuren die ons lichaam niet aan kan maken en die we dus uit onze voeding binnen moeten krijgen. De eiwitten in Clear Whey Isolate bestaan voor wel 47% uit deze essentiële aminozuren!
Drie belangrijke essentiële aminozuren zijn de BCAA’s leucine, isoleucine en valine. Clear Whey Isolate bestaat voor 20% uit deze BCAA’s, in de wetenschappelijk onderbouwde verhouding 2:1:1.
Mocktail tip
Als heldere eiwitlimonade is Clear Whey Isolate ook perfect geschikt om te mixen met andere drankjes. Probeer bijvoorbeeld eens deze tropische mocktail!
- 300 milliliter kokoswater of ananassap
- 1 scoop Clear Whey (25 gram)
- 100 milliliter bruiswater
- Schijfje limoen
- Meng het kokoswater of ananassap met de Clear Whey en laat 5 minuten staan. Top af met het bruiswater en het limoenschijfje. Geniet ervan!
Tip! Ananassap bevat suiker. Wil je een zo hoog mogelijk percentage eiwit in je drank? Kies dan voor kokoswater.
Claims
- Eiwitten voor het behoud van sterke botten - Eiwitten spelen een rol bij de botaanmaak - Eiwitten voor meer spieropbouw en spierkracht - Eiwitten, voor herstel van spieren na fysieke inspanning
Samenstelling
| Voedingswaarden | Per 100 gram | Per 25,0 gram |
| Energie | 1466 kj | 366,5 kj |
| Energie | 345 kcal | 86,2 kcal |
| Vetten | 0,1 g | 0,0 g |
| - Verzadigde vetten | 0,1 g | 0,0 g |
| Koolhydraten | 1,3 g | 0,2 g |
| - Suikers | 1,0 g | 0,2 g |
| Vezels | 0,0 g | 0,0 g |
| Eiwitten | 81 g | 20,2 g |
| Zout | 0,11 g | 0,0 g |
| Samenstelling per dosering | Per 100 gram | Per 25,0 gram |
| Alanine | 4704 mg | 1.176,0 mg |
| Arginine | 1832 mg | 458,0 mg |
| Asparaginezuur | 9408 mg | 2.352,0 mg |
| Cysteïne | 1516 mg | 379,0 mg |
| Glutaminezuur | 15788 mg | 3.947,0 mg |
| Glycine | 1276 mg | 319,0 mg |
| Histidine | 1356 mg | 339,0 mg |
| Isoleucine (BCAA) | 5740 mg | 1.435,0 mg |
| Leucine (BCAA) | 9488 mg | 2.372,0 mg |
| Lysine | 8532 mg | 2.133,0 mg |
| Methionine | 1912 mg | 478,0 mg |
| Fenylalanine | 2552 mg | 638,0 mg |
| Proline | 5500 mg | 1.375,0 mg |
| Serine | 4068 mg | 1.017,0 mg |
| Threonine | 6300 mg | 1.575,0 mg |
| Tryptofaan | 1516 mg | 379,0 mg |
| Tyrosine | 2392 mg | 598,0 mg |
| Valine (BCAA) | 5104 mg | 1.276,0 mg |
Kan sporen bevatten van
melk
Ingredienten
Wei-eiwit Isolaat (MELK), citroenzuur (zuurteregelaar), natuurlijk tropical aroma (smaakstof), maltodextrine (antischuimmiddel), sucralose (zoetstof), kurkuma (kleurstof).
Gebruik
Meng 1 maatschep Clear Whey Isolate (25 g) met 400 ml water in je shakebeker. Schud 10 seconden en laat 5 minuten rusten.
Verantwoordelijk voor het in de handel brengen
Vitakruid BV
Dit product is een voedingssupplement.
Aanbevolen dosering niet overschrijden.
Een gevarieerde, evenwichtige voeding en een gezonde levensstijl zijn belangrijk. Een voedingssupplement is geen vervanging voor een gevarieerde voeding.
Buiten bereik van jonge kinderen houden.
Droog, afgesloten en bij kamertemperatuur bewaren, tenzij anders geadviseerd op het etiket.
Raadpleeg een deskundige alvorens supplementen te gebruiken in geval van zwangerschap, lactatie, medicijngebruik en ziekte.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 19 reviews
Sort
Product Reviews
★★★★★ 5
Easy to apply.
Size: 4 Oz
Product did a great job renewing my plastic house shutters. It brought back the deep rich color and made them look better the new.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Great Stuff
Size: 120 ML
Product is good, Easy to spread for the most part. The only complaint I would give it is that the applicators do not hole up after several applications, I would suggest using a microfiber cloth to apply.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
★★★★★ 5
Restored My Trim Instantly
Size: 120 ML
I used this plastic restorer on the faded trim around my SUV, and the difference was immediate. The dull gray plastic turned back to a rich black color within minutes. It spreads evenly and doesn’t leave greasy streaks behind. After a few weeks and several rainy days, the finish still looks great. My car honestly looks years newer now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
★★★★★ 5
Great result, exceptional value, and easy, forgiving application.
Size: TRIM COAT KIT
I am thoroughly pleased with the results of this product, and the application was easier than I expected. Outstanding stuff. I am writing a longer review in case it helps people who are unsure about a "once and done" product that calls itself permanent. It's not hard to apply. It is forgiving and there's time to even it out. But here are some things to anticipate.
My use case:
I used Cerakote to restore the plastic trim on a used 2014 black Dodge Challenger that had been repainted but the plastic trim was original and it had been kept outside by the prior owner, so the contrast between the new paint and faded trim was noticeable. The trim was originally a deep, dark gray (it is never as black as the paint). It had faded to a medium-gray in many places: running boards on the side beneath the door, below the read bumper (which were also somewhat worn from debris), around the tail lights, and the plastic piece beneath the windshield wipers between the windshield and the hood. These were all looking weathered. The trim was very oxidized in some places, chalky grey near the hood and around the back bumper. The plastic around the tail lights also had light streaks in it from where water drains down from the trunk.
What else I tried before I tried Cerakote:
I got middling results from Mother's Back to Black. It looked somewhat better for a week or two, and then it went back to looking as before. Not impressed.
I got a tip online to try rubbing the plastic trim with a melamine magic eraser, so I did that next, and this made a significant difference. Melamine is abrasive, so be careful if you do this on your trim. I went gently, up-and-down, side-to-side and in small circles, by hand, with gentle pressure like one would with a polishing compound. By removing the oxidation, the plastic was a few shades darker in the worst spots and the streaking on the rear tail light piece was gone. The rough spots on the trim at the bottom of the car and around the wheels looked somewhat better. But it certainly did not "like new."
Cerakote experience:
I decided to give Cerakote a try based on the video and good reviews. Bam! Back to factory-like deep dark gray. I wish I had taken pictures. It's incredible. Fully satisfied!
I had already washed the trim with Dawn dish soap. I started with the trim bone dry. You are warned everywhere that water droplets will ruin the result, so don't expect to do this process right after you wash the car unless you like to live dangerously and have compressed air to spray cracks and crevices.
I was worried that application would be streaky if I didn't do it right. Not so. It is forgiving. Here's what I learned.
1) The first 20% of what you'll get out of the packet goes on heavy with the lightest touch. One packet goes a long way. The next 60% is the "normal" application. This goes on the easiest. You can really milk the last drop out of each towelette, but I didn't because the last 20% of what you can get out of it by rubbing it really hard comes out very light and is not worth the uneven application unless you have some random area you don't care much about and want to use the remainder for that. I only used 5 packets to do the whole car.
When you start a new packet, the beginning is where you might want to go back later and even it out once the application gets more normal. Or better, start a new packet on a big section to spread it around well and then move to smaller trim when the towelette is less fresh.
2) You've got time to work with it and make corrections. It stayed liquid like water for at least 20 minutes in my conditions: about 80 degrees, not very humid, indirect sunlight on an 80 degree car. Don't apply in direct sun or on a hot car. The product then gets sticky as it cures, but you can still work with it during the sticky time, rubbing it in and spreading it evenly with the towelette. I did not use a microfiber to "knock down" heavy spots. I just came back around with the towelette. I think a dry microfiber might pull off too much product. When it is half-cured, it is sticky and you can buff it with the towelette at this stage to further flatten and even things out. Work in sections, one piece of trim at a time.
3) Overlaps won't show as long as you rub it all in thoroughly. I tried the overlapping parallel passes method that they recommend, and this works pretty well. I was worried that I might get a "double heavy" streak where the passes overlap but this not so unless the towelette is fresh, but this is fixable. You can do a pretty natural, casual back-and-forth motion for the most part and it comes out fine. This is NOT a super-finicky product. I made a second or third back-and-forth pass in a few areas, and used circular motion in some places where the trim was textured or a little rough from wear, and it all looked even in the end. Just rub it down into the plastic and even out the sheen while it is uncured and it's good.
4) It cures like you see it when it's still wet. It doesn't lighten up very much as it cures. It just looks a little less wet. So get it right by eye when it is wet and that's pretty much what you will still have in an hour when it is cured.
5) Don't miss a spot! You'll see it for sure if you do because the different is so dramatic. And a "second coat" is not easy or recommended. This is the only once-and-done part that you want to get right, and you have plenty of cure time to be thorough.
6) Use the folded corner of the towelette to get into small corners and edges, like where the trim meets the paint or has an inside corner or some little nook. A fresh towelette is great for getting into small areas because a feather touch applies plenty of product when the towelette is fresh.
The trim now looks amazing and I am entirely satisfied. I will use Cerakote on my other vehicles. The only minor con is a strong ammonia smell when you are up close to it while it is wet. No smell once it is cured. I would definitely wear the recommended gloves while applying. As others say, you will probably drop that towelette on the ground. It's slippery when wet. Keep it folded in quarters as it comes for ease of application. Turn to a new quarter once a side gets dirty or dry and fold it inside out for four more quarters to use.
Bonus, but off-label -- at your own risk:
The product is not intended for the soft rubber around the windows, but I tried it there too, and it looks amazing. All I did was wash the rubber with dish soap like the trim, and I rubbed it a few times with a wet microfiber cloth to get the superficial layer of oxidized rubber off. Then I applied Cerakote. It looks great.
The rubber used to be blotchy and faded. The microfiber evened this out a little. I would not use melamine on the rubber -- this made it look worse in a test section. The Cerakote made it look great: jet black, much shiner, and much more even looking. Not quite "brand new" but far better than I thought possible. I thought I might need to replace the rubber. Now it's looking great next to the jet-black new paint. This afterthought use alone was worth the money.
Can you apply a second coat the next day?
They don't say you can, and I don't recommend it. This is meant to be one-shot, which is why you should check to make sure you don't miss any spots.
I had two areas where I tried a second coat the next day. The first was on the plastic trim between the windshield and the hood. I didn't rub this trim much with melamine beforehand so there was a lighter area (light grey originally, the worst spot) that didn't get as black as the other sections so I did it again, which helped a little, but not much. I didn't wash this area with soap beforehand because I wasn't intending to fix it until I got going. Once you put things back to black you will start noticing other faded things more.
Likewise, I did a second coat on the very top of the soft rubber at the bottom of the windows (the part which faces upward and thus gets the most sun), it wasn't as shiny as the other parts, so I went over that section gently again the next day with a fresh towelette.
As soon as I did it, I thought it was a mistake. This didn't go well initially because the cured coating is very hydrophobic so the new, wet, Cerakote of the second coat goes on smooth initially and then "puddles up" into little droplets a few minutes later. It doesn't want to stick to the first coat. I thought I had messed it up, but I let it cure a little until the sticky phase, and spread it out again with the towelette. It stayed that time but gathered back a little into some streaks. I spread it once more a few minutes later and it looked good. It stayed even. It looks just fine a few days later, so I think it cured OK.
I hope this product last for months as advertised. Even if it doesn't I would totally do it again because the results are superior, I still have half my towelettes left, and the product is not expensive. 10/10 would do again and will recommend to everyone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 25, 2025
★★★★★ 5
Easy to use, amazing results
Size: TRIM COAT KIT
This is an awesome product that is easy to use and has amazing results. My plastic trim never looked so good.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
recommand products
Casamance Jardin Felicia Amaryllis - 76580916
158.00
Little L Set Van 2 Sensorische Ballen - Blauw En Geel
19.95
Casamance Modernismo Lina - 76851732
128.00
HÖGERT TECHNIK Opvouwbare werkplaatstafel 700 x 650 x 915 mm met bamboeplaat, 5-voudig in hoogte verstelbaar, 450 kg draagkracht, boringen, verbindingsstukken en spanklemmen
171.38
3-in-1 lasapparaat, multifunctionele MIG-lasmachine 200A Core Line met LCD-kleurendisplay, IGBT-inverter voor MIG/MMA/Lift TIG-lassen
149.49